How to Maintain Industrial Panel PC?

An industrial tablet PC, also known as an industrial all-in-one computer, is a computer that is used in an industrial environment. Like ordinary computers, it is also composed of a display device and a host computer. The difference is that the material of the industrial tablet PC’s equipment is designed for industrial environments and can be used in harsh environments, while ordinary home computers cannot.

The use of industrial tablet PCs is becoming more and more popular, but do you know what problems you should pay attention to when using them? The following Symtrue to give you a detailed introduction to the usual use of the tablet PC should pay attention to the specific matters.

1. Industrial flat panel computers should be placed in a neat room. Dust will have an adverse effect on almost all the accessories of the computer, thus shortening its life and affecting its performance. Although the protection level of the tablet PC is IP65, which can be dustproof, but sticky dust will have a negative impact on the heat dissipation and the touch effect of the industrial display. We usually do a good job of cleaning the environment when using the tablet PC, you can effectively increase the service life of the industrial tablet PC.
2. In the case of a dry environment, you should be careful to prevent the impact of static electricity on industrial flat panel computer accessories. If you need direct contact with the circuit board, please discharge yourself first, such as touching the table with your hands; or take other insulation measures, such as: wear anti-static gloves, anti-static bracelets, etc.
3. Industrial flat panel computer should be placed in a spacious space, around to retain heat dissipation space, do not mix with other debris.
4. Industrial flat panel computer around the magnetic field is strictly prohibited. Magnetic field will have a serious impact on the industrial display, CPU, hard disk, etc., thus affecting the performance of the industrial panel PC.
5. Hard disk reading can not be suddenly shut down or power off.
6. Do not place a tea cup on the industrial panel PC table, not to mention that it can not be placed on top of the industrial host, industrial display, although the protection level is high, but once the water, the consequences are very serious, we should try to avoid such things happen.
7. Do not use alcohol or laundry detergent to wipe the industrial monitor screen, if necessary you can use water, but water must be adsorbed on top of a paper towel or rag, can not let the water linger too long, otherwise it will have an impact on the effect of the touch screen, it is recommended to use the manufacturer to give the cleaner or buy a screen cleaner to meet the requirements of cleaning.
8. industrial panel PC work, do not move the main chassis or the host of violent collision behavior, which is a very dangerous action for the hard disk.
9. Regularly dust the power supply, the interior of the chassis, industrial monitors, keyboards, mice and so on. If it is inconvenient to deal with yourself, you can ask professionals to complete. Industrial display inside the high-voltage circuit, if not professionals, do not act recklessly, safety is the most important.
10. Tablet PC in the state of power on, do not plug and unplug accessories or interfaces (except for devices that support hot-plugging), otherwise, it may cause serious consequences of burning the relevant chip or circuit board.
11. Do not switch on and off frequently, the computer should be switched on and off at intervals of time, such as three minutes.
12. Should be properly stored in a variety of industrial panel PC manual, especially the motherboard manual, in case of failure to view the use.
13. Industrial panel PC chassis can not be disassembled at will, because it will lead to the chassis mixed with debris and other conductive body, easy to cause the chassis of the board short circuit, resulting in serious consequences.
14. industrial panel PC in the case of a long time without use, you are recommended to run regularly to drive away its internal moisture, otherwise, it may affect the normal start-up work of the tablet PC.

Industrial panel PC is a special electronic equipment products, in the process of use, in order to ensure the safety and normal operation of the equipment, does not affect the normal operation of the enterprise work, so we do a good job of maintenance and maintenance of equipment is very necessary. The above is Symtrue (www.sztouchmachine.com) to do for you to share the specific notes on the use of the tablet PC, I hope it will help you.