Embedded Industrial Panel PC Installation Method and Precautions

Industrial panel PC is an all-in-one computer applied in the industrial field, which has the characteristics of waterproof and dustproof, anti-vibration, anti-electromagnetic interference, stable performance, and can run for a long time, so it is widely favored by customers. Industrial panel PC has been widely used, but about the installation method and use of embedded industrial panel PC precautions, many people still do not know very well, the following Symtrue will give you an introduction.

First, the installation method of embedded industrial panel computer

• 　　 First put the body flat in a smooth place, the base accurately embedded in the body.
• 　　On the screws, screw into each eyelet, and confirm whether to tighten.
• 　　Before cleaning the embedded industrial panel PC screen, stop using the device and unplug the power supply to ensure that the device is in a power-off state, do not use the spray directly on the monitor screen.
• 　　 Touch screen should be kept clean from time to time, such as the appearance of dust and dirt, available towels or softer items to scrub, it is recommended that the use of non-corrosive cleaning of glass.

　Second, the use precautions of embedded industrial panel PC

• 　　Because embedded industrial panel PC is commonly used in public places, voltage instability may cause equipment damage. It is recommended that the use of stable utility power, do not and elevators and other high-power equipment to use a common power supply.
• 　　The embedded industrial panel PC in a ventilated, dry, no direct light environment, do not let the equipment wet, moisture; equipment around the 250px or more space for heat dissipation, to ensure normal operation, continuous switching time should not be less than 10 seconds. Please pay extra attention when using in the environment of swimming pool, bathroom, kitchen, etc.
• 　　Do not place the embedded industrial panel PC equipment in a sealed place, or cover the equipment, block the equipment ventilation holes, to prevent the equipment from working when the temperature inside the box is too high and damage.
• 　　Be sure to check the host, industrial display, touch screen is not connected to the power supply before you turn on the power to confirm that there is no error.
• 　　Please use the industrial panel computer manufacturer specified installation devices and accessories. Avoid stepping on or pinching the AC power cord, plug or power adapter.
• 　　Do not disassemble or repair the embedded industrial panel PC by yourself to avoid high-voltage electric shock or other dangers. The correct approach is to ask professional maintenance personnel to complete all the overhaul work.
• 　　During thunderstorms or long periods of non-use unplug the power supply of the machine. Transportation and use should try not to touch the LCD screen, do not squeeze the LCD screen, do not let sharp objects, hard objects cut, touch the LCD screen to avoid causing damage to the LCD screen.